W&LLR Wagons - The Line Side Hut

Go to content

W&LLR Wagons

Our Wagon Kits are inspired by many narrow guage lines, all our kits are laser cut and fit together cleanly to form a solid model. any strapping and hinges are for illustration only and are not included in the kit, allowing the modeller to add there own unique stamp on there model.

Cattle wagon closed sides, as used on the W&LLR, Inspired by the cattle wagons which must have been a popular sight on the W&LLR in its hay day. this model represents the closed end full height versions with side cut outs in the lower planking, inspired from a photograph by D.Ballantyne circa 1951, a wealth of detail down to the top opening doors left and right and the lower floor opening door for the cattle to traverse, all doors are supplied without hinges and can be just glued in place or for the more adventurous can be made to open, the small upper doors are supplied in two forms, two small doors per side to be made to open and two doors joined in the middle for gluing in if you prefer. suggested axle boxes would be leaf spring on 24mm wheels not supplied.
Dimensions are, Length 236mm, Width 100mm, Height 116mm.

Cattle wagon as used on the W&LLR, Inspired by the cattle wagons which must have been a popular sight on the W&LLR in its hay day. the model represents the full open versions, this model has a wealth of detail down to the top opening doors left and right and the lower floor opening door for the cattle to traverse, all doors are supplied without hinges and can be just glued in place or for the more adventurous can be made to open, the small upper doors are supplied in two forms, two small doors per side to be made to open and two doors joined in the middle for gluing in if you prefer. suggested axle boxes would be leaf spring on 24mm wheels not supplied.
Dimensions are, Length 236mm, Width 100mm, Height 116mm.
WA-007
W&LLR Closed Cattle wagon, complete body kit
£ 38.00
Add


Chassis Kit avaiable 32mm & 45mm see "Chassis Kits and Bits"
WA-002
W&LLR Cattle Wagon, complete Body kit
£ 38.00
Add


Chassis Kit avaiable 32mm & 45mm see "Chassis Kits and Bits"

W&LLR Brake Van No.8759, this model follows the modifications to the original which were carried out sometime between 1909 and 1922 when the external frames on the body sides were renewed with three cross braced panels, the central door was boarded over and the sliding doors were moved to the sides of the veranda which was also enclosed at its end. Easy to assembly with a wealth of detail and sliding doors, planking inside and out and perspex’s glazing adds to the detail. The brake van also includes an additional internal partition wall, as aesthetically this does add to the model even if not correct, but the choice is yours. 24mm wheels and leaf spring axle boxes are suggested but are not included in the kit.
Dimensions:  Length 228mm   Width 104mm   Height 110mm






W&LLR Cattle wagon, Working Door Kit, comprise all the components to make the small upper doors and larger lower doors work on either of the cattle wagon’s offered by The Line Side Hut. This is a kit of components and is designed to make all the doors work on both sides of the wagon. It will require some precise measurement and accuracy and a small amount of cutting to the frame. This kit does not include the doors.
WA-008
W&LLR Brake Van, Complete body Kit
£ 45.50
Add


Chassis Kit avaiable 32mm & 45mm see "Chassis Kits and Bits"
SR-022
W&LLR, cattle wagon, Working Door Kit.
£ 4.00
Add

W&LLR Covered Van. Inspired by the drawings of Covered Van No. 100665 built by Pickering’s in 1902 which must have been a popular sight on the W&LLR in its hay day. this model is based on the Van when in service between 1937 – 47 when it carried the GWR livery, having a wealth of detail down to the sliding doors, the doors come with the parts to make them slide but equally can be glued in position if preferred. Suggested axle boxes would be leaf spring on 24mm wheels and buffers not supplied.

Dimensions are: Lenght 236mm, Width 100mm, Height 116mm.

W&LLR Private owner wagon “Peate & Sons” designed by Pickering & co. in 1903 for Messrs J. Ll. Peate and sons, coal and lime merchants of Llanfair, although the dimensions were very close to the standard Llanfair railways own wagons, the design differs slightly to accommodate the lime and coal loads to be carried. Peate, ordered five wagons in total 2,5,6,7 and 8. The kit is faithfully recreated in wood with link chains and decals, a set of numbers is included with each kit, so you can build all five! Supplied with wheels and axle boxes, available in 32mm and 45mm versions.
WA-018
W&LLR Covered wagon complete Body Kit
£ 37.50
Add
WA-024-32
W&LLR Private owner wagon "Peate & Sons" 32mm
£ 53.50
Add
WA-024-45
W&LLR Private owner wagon "Peate & Sons" 45mm
£ 54.50
Add

W&LLR Sheep wagon 6 Plank with door No.34172, The original wagons did not have ramps and the number of planks varied between five and six, the wagons were built in a similar manor to the wagon no 71701 with battens being placed across the floor and sockets mounted on the sides and buffer ends, which would just slot into place, at a later date a door that dropped to form a ramp giving access to the wagon was fitted to both the five and six planked versions. complete working door kit is included.
Dimensions Length 168mm, Width 100mm, Height 84mm,

W&LLR Sheep Wagon 5 Plank with door No.71699, the original wagons did not have ramps and the number of planks varied between five and six, the wagons were built in a similar manor to the wagon no 71701 with battens being placed across the floor and sockets mounted on the sides and buffer ends, which would just slot into place, at a later date a door that dropped to form a ramp giving access to the wagon was fitted to both the five and six planked versions. complete working door kit is included.
Dimensions Length 168mm, Width 100mm, Height 84mm,
WA-020
W&LLR Sheep wagon 6 Plank with door No.34172 Complete Body Kit
£ 32.50
Add


Chassis Kit avaiable 32mm & 45mm see "Chassis Kits and Bits"
WA-021
W&LLR Sheep Wagon 5 Plank with door No.71699 Complete Body Kit
£ 31.50
Add


Chassis Kit avaiable 32mm & 45mm see "Chassis Kits and Bits"

W&LLR Sheep wagon 5 Plank No.71701, In March 1930 six wagons were made flat and fitted with rippled sides, the sides and ends being removed and battens were placed across the floor and sockets were mounted on the sides and buffer ends to take the new sides, which would just slot into place, the sides original had corrugated sheet inside which gave the rippled effect but this was soon dispensed with for ease of use. The model represents the original design with the sides just slotting into the sockets.  
Dimensions are: Length 168mm, Width 100mm, height 80mm.






Chassis kit to fit W&LLR Sheep wagons,  This chassis kit will fit all three sheep wagon variants,  No. 71701 -WA-019 , No. 34172 - WA-020 & No. 71699 - WA-021. The kit comprises of wheels, bearings and axle boxes in either 32mm or 45mm gauges.
CH-WA-019-32
Chassis kit to fit W&LLR Sheep wagons WA-019, WA-020, WA-021 includes wheels, bearings and axle boxes. 32mm
£ 15.50
Add
CH-WA-019-45
Chassis kit to fit W&LLR Sheep wagons WA-019, WA-020, WA-021 includes wheels, bearings and axle boxes. 45mm
£ 15.50
Add
WA-019
W&LLR Sheep wagon 5 Plank No.71701 Complete Body Kit
£ 29.50
Add


Chassis Kit avaiable 32mm & 45mm see "Chassis Kits and Bits"
Email: Enquiries@thelinesidehut.co.uk
Back to content